Gen 2 high pinion front diff into Gen 1
Posted: Fri Nov 28, 2008 2:23 pm
Browsing the bible last night, (you know, the tech 'imfo' database 
) and came across the axle data.
Would I be right in assuming that an NH/NJ 3.0L manual front diff ("3.0V6 :- same as Gen 1 except for NH & NJ auto has 7.25" diameter front diff (high pinion) NH & NJ 5sp man has 8" diameter front diff (high pinion)") would be a bolt in swap for my NG's low-pinion diff ("front axle = 28 spline, 29mm diameter, diff = 8" diameter (low pinion) ")?
Yes I searched but it just returns loads of crap.
) and came across the axle data.Would I be right in assuming that an NH/NJ 3.0L manual front diff ("3.0V6 :- same as Gen 1 except for NH & NJ auto has 7.25" diameter front diff (high pinion) NH & NJ 5sp man has 8" diameter front diff (high pinion)") would be a bolt in swap for my NG's low-pinion diff ("front axle = 28 spline, 29mm diameter, diff = 8" diameter (low pinion) ")?
Yes I searched but it just returns loads of crap.