Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

spot light wireing

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 28
Joined: Sat May 03, 2008 7:15 am
Location: nsw

spot light wireing

Post by fudly »

ok i just put some spotties on the front ran all the wirin to the spotties ,battery and relay . so i pulled out the trusty test lamp to find the high beam wire at the standard headlight started testin and found they all had power all the time even without the headlights turned on. so i could run the activation wire from the relay thought a switch direct from the battery but i would prefer to run it from the high beam . so what i need to know is the correct place to connect the activation wire so they can only be activated when the high beam is on?

yes i know i like the word "so" :)
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

So have a read through the bible so you can find the thread detailing wiring spotties into a zook so.
Zoooks are different, so standard wiring won't help so.
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

Posts: 28
Joined: Sat May 03, 2008 7:15 am
Location: nsw

Post by fudly »

ok sweet thanks i did actually look in the bible before postin and did a search . the bible which lets be honest is a mess could really do with a clean up i ended findin the topic which wrx gave me right in the bottom section so clearly i didnt look that far down im sorry

fudly goes back to his corner to watch the clear wiser peaple then him :)
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests