Outer Limits 4x4 Board

ok i just put some spotties on the front ran all the wirin to the spotties ,battery and relay . so i pulled out the trusty test lamp to find the high beam wire at the standard headlight started testin and found they all had power all the time even without the headlights turned on. so i could run the activation wire from the relay thought a switch direct from the battery but i would prefer to run it from the high beam . so what i need to know is the correct place to connect the activation wire so they can only be activated when the high beam is on?

yes i know i like the word "so"

So have a read through the bible so you can find the thread detailing wiring spotties into a zook so.
Zoooks are different, so standard wiring won't help so.

ok sweet thanks i did actually look in the bible before postin and did a search . the bible which lets be honest is a mess could really do with a clean up i ended findin the topic which wrx gave me right in the bottom section so clearly i didnt look that far down im sorry

fudly goes back to his corner to watch the clear wiser peaple then him