Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What diff gears?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

What diff gears?

Post by BlueSuzy »

Ok

I have found a set of Bundera Diffs but they come with 4.88 Gears Right?

I have 6.5:1 in my transfer
I want to run prob 35-36" Tyres

I still have stock 3.7 Suzy diffs atm and with the 33'(32) they are in the perfect rev range etc.

I dont want Suzy to be revving super high on the freeway!

Would it be better to go a lux lower ratio?

I know a Lux centre wont fit in a Bundy housing because of the steer arm on the rear. So i may go Lux front whole diff instead of bundy.

So Many Questions i know. :oops:
I am Tim
Posts: 696
Joined: Mon Jan 10, 2005 7:07 pm
Location: Greenbank

Post by zookimal »

Not all Bundy's are 4.88s

From memory there were some 4.3s and one of the other ratios in between too.
-Mal

Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Well i am unsure of this year model and what engine.

BUT Just found out different Bundy ratios
84-85 2.4TD(2LT) LJ70 4.88
85-92 2.4TD(2LT) LJ70 4.88
84-85 2.4P (22R) RJ70 4.3
85-92 2.4P (22R) RJ70 4.55
I am Tim
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

There are plenty of gearing calculators around. Here is one of them http://www.izook.com/gearcalc.htm Just drop your current figures in there and then your new figures and you'll soon see how close you are in rpm at a given speed.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Im after someone that has done lux diffs with my transfer gears. I'm sure it has been done before ;)
I am Tim
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Hey BlueSuzy,

I was bored so i did some homework for you:

Assuming you have stock 5spd (0.89), 6.5 tranny gears (1.69) and 4.88 diffs at 62mph = 4104rpm

Assuming you have stock 5spd (0.89), 6.5 tranny gears (1.69) and 4.3 diffs at 62mph = 3616rpm

Assuming you have stock 5spd (0.89), 6.5 tranny gears (1.69) and 4.55 diffs at 62mph = 3826rpm

4.3s look good with your setup :D
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Ah dude i lurve yoo :D

So thats with the 33/32's eh? or 36's? :twisted:

Im assuming 36's....Should be cheap to get someones rear luxes ratios when they are upgrading with a swap or sell of my 4.88s :D
I am Tim
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Yeah mate thats with 36s :D
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 696
Joined: Mon Jan 10, 2005 7:07 pm
Location: Greenbank

Post by zookimal »

Should have no problem selling 4.88s.
-Mal

Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

I know with the 4.88's :D

She's goin to be hugeeeeeeee! :D
I am Tim
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

Id keep the 4.88s You will need it down low as it will be doughy pushing 36s round. You will also be sapping hp with bigger running gear and tailshaft angles to run the 36s. Extra rpm will help make up for it.
(ps I have 4.88s 6.5s and 37s)
Its a wheelbase thing
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

oooooh ok.. Looks like im keeping 4.88's...
I am Tim
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests