Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front end problem

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

front end problem

Post by sally_o »

my 96 swb vit is making a real ratchette type noise when it is engaged in 4x4, was thinking front diff but when i dissengage the transfer case it stops even if the hubs r still locked in would this mean more likely the tranfer case?????? im in the proces of putting new wheel bearings and cv boots on it(did drivers side last weekend, passenger will be done over xmas)but seems all fine there otherwise.
also i did weld the rear diff the other day.
any help would be appreciated thank you .
Posts: 125
Joined: Wed Apr 02, 2008 10:06 pm
Location: Tamworth

Post by rustyzook »

dose it happen only at full lock or all the time, could be a CV
I like my women like i like my zook, cheap and top heavy!
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

Post by sally_o »

it dosnt matter what lock or even if straight .. just when its in 4x4(tansfer case engaged) it makes the noise
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

Post by sally_o »

wow .... so much feed back
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

First up, it sounds like a cv clicking.
Second, don't go with the attitude, as you will get no one willing to help. There are some good guys out there, just wait and the right answer will come. ;)
regards
me




[PS] this will probably get me banned. :cry: under the new rules.
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Posts: 141
Joined: Fri Jan 25, 2008 10:29 pm
Location: Melbourne

Post by wideaz »

sounds like the transfer case mate
prob take it to your local mechanic and get them to have a look at it
wont take long
if it is rebuild it and put some s3 gears in them
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

only problem is wideaz that its a vit not a sierra so s3 will be a problem :lol:

i myself would be thinking CV mate,a local chick here used to eat CVs in her vitara.see how you go,check if your losing drive etc
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

id start by having your cv's checked
other than that if its clicking sraight ahead all the time a mechanic will find it easy if its run on a hoist
cheers andrew
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 696
Joined: Mon Jan 10, 2005 7:07 pm
Location: Greenbank

Post by zookimal »

Definately check to see if it's got drive to the front. Sounds cv/axle related.
-Mal

Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Posts: 19
Joined: Wed Jan 02, 2008 10:15 am
Location: melbourne, east suburbs

Post by chris.e »

Front driveshaft splines worn?
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

chris.e wrote:Front driveshaft splines worn?
Vitaras don't have splines on the front driveshaft, they have a slip yoke in the transfer that's oil lubricated, so there's almost no chance of wear.

get someone to have a listen to the car as you drive past. It could be transfer related, but when you are in the car, transfer noises tend to sound like they are coming from directly under or behind you.

It might still be CV related - they're only freewheeling until you have the hubs locked and the transfer in 4WD so they won't be seeing any load under any other condition (ie 4WD hubs unlocked/2WD hubs locked)

As has been said, check for front drive and check for the source of the noise.

I its the transfer, I don't think I'd bother getting a vitara transfer rebuilt unless you want to put reduction gears in it. There's lots of cheap vitara transfers kicking around.

steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

I've been hearing lately of a couple Vit t-cases having stretched chains causing issues. If it is the t-case then just pick up another used one as they are pretty cheap because generally nobody wants them.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

If you do need to get another t-case then make sure you get the right spline on the rear slip yoke as they changed on the later models.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests