i need to know the clutch slave cylinder push rod length for a gq 4.2 diesel. im not sure if it would make any differents but it is a boosted asissted clutch. i have a home made one and thing that its not the right lenght? if someone could measure theres for me it would be very helpful.
thank you
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clutch slave cylinder push rod length
Why R U going to the trouble of building one? 
I got an entire slave cylinder complete with rod, rubbers and fittings all new for only $35.00 last month from Auto 1. Fitted it in only 1 hour. Best short cut in the world.
Dave
I got an entire slave cylinder complete with rod, rubbers and fittings all new for only $35.00 last month from Auto 1. Fitted it in only 1 hour. Best short cut in the world.
Dave
1997 GQ 4.2 Diesel Wagon
Aftermarket turbo & intercooler, 3" Exhaust,
4" susp Lift, 3" body lift, 35" Muddies
Spotties that start bushfires at 100m
Pleasure in life : Towing Toyotas
Aftermarket turbo & intercooler, 3" Exhaust,
4" susp Lift, 3" body lift, 35" Muddies
Spotties that start bushfires at 100m
Pleasure in life : Towing Toyotas
Who is online
Users browsing this forum: No registered users and 2 guests