Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IFS Lift

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 48
Joined: Mon Jun 23, 2008 6:39 pm
Location: Sydney

IFS Lift

Post by muffins »

My 94 Pajero has apparently already had a 2 inch lift in the front, however the CVs still sit basically flat! Does this mean that there is still heaps of room to crank up the front? I've seen a few photos of Pajeros where the front suspension is wound up and the CVs are definately on an angle. I can attach a pic if people need it.
Top
Posts: 22
Joined: Mon Aug 04, 2008 6:59 pm
Location: ipswich QLD

the loook

Post by redreid1978 »

does it have ball joint spacers?? the cv shafts will sit straighter if the ball joint spaces are fitted .. and you can get the ifs pirtty high ,,, my paje is about 5 inch above standard.. crank the up until there is about 10mm front the top bump stop and as soon as you do you will need a wheel alignment and make shaw the fix the camber you want about possative 1/2 degree doing this will save th cv's from rolling out.. and you want to have the toe setting at about negetive 1mm total.....
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 2 guests