Outer Limits 4x4 Board

My 94 Pajero has apparently already had a 2 inch lift in the front, however the CVs still sit basically flat! Does this mean that there is still heaps of room to crank up the front? I've seen a few photos of Pajeros where the front suspension is wound up and the CVs are definately on an angle. I can attach a pic if people need it.

does it have ball joint spacers?? the cv shafts will sit straighter if the ball joint spaces are fitted .. and you can get the ifs pirtty high ,,, my paje is about 5 inch above standard.. crank the up until there is about 10mm front the top bump stop and as soon as you do you will need a wheel alignment and make shaw the fix the camber you want about possative 1/2 degree doing this will save th cv's from rolling out.. and you want to have the toe setting at about negetive 1mm total.....