Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80series crusier speedo cluster

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 55
Joined: Thu Oct 04, 2007 12:54 pm
Location: brisbane

80series crusier speedo cluster

Post by solo13 »

hi iam makeing a new instrument cluster does anyone have anything on the wires behind the cluster.like what wire is for what.its a 1991 80series petrol was 3f.iam makeing my own dash its going to have seperent speedo (autometer) and autometer gauages as well.just wanting to no which wires were for fuel and temp and tacho and oil and volts.ty brian
Last edited by solo13 on Wed Jan 07, 2009 4:41 pm, edited 3 times in total.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Good luck Brian
I can tell you there are heaps of wiring changes. 1990 to 8/1992 ran cable spedo, except for 3fe auto petrol that ran electronic. This system was adopted across the range after 8/92. There are differences with warning lights petrol to diesel, spedos are different too. 1/95 saw warning lights and pin positions of wires change again. If you put a gxl dash in a std and it is of thesame year and motor, it will work. if they are not compatable years, you will go gray fast.
Andrew
Confucious say...man who argue with idiot, worserer himself
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest