Page 1 of 1

Stupid tyre question

Posted: Sat Jan 10, 2009 7:46 pm
by TURBOMQ
Sorry guys for the stupid question but what is the correct pressure to run a 31x10.5 inch goodyear tyre on a mq patrol? short wheel base
thanks guys

Posted: Sat Jan 10, 2009 8:28 pm
by gqroo
Any where from 30/35psi would be a good start,depending on what terrain or weight you will be lugging.

Hope that helps ;)
Cheers Lou.

Posted: Sat Jan 10, 2009 8:45 pm
by dont_follow_me
on road with no real load - 28-30 psi all round or 32 if you like it a bit firmer esp in a SWB with leafs

loaded heavily - 38 psi in the rear would be okay

Posted: Sat Jan 10, 2009 8:46 pm
by TURBOMQ
Thanks mate, yeh i thought it was around 35, not alot of weight and these tyres are just for on the road so i reckon i will leave em at 35

Posted: Sat Jan 10, 2009 9:32 pm
by TURBOMQ
And does anyone know where to get cheap sunraysia black wheels in melbourne and what offset i should run on a mq?

Posted: Sat Jan 10, 2009 10:54 pm
by turps
TURBOMQ wrote:And does anyone know where to get cheap sunraysia black wheels in melbourne and what offset i should run on a mq?
If you have flares. Then just the std offset (what most call toyota offset) will be fine. All tyre places will be able to order a black ROH Track or Track2 rim. Think there normally a couple of bucks more than white.

Posted: Sun Jan 11, 2009 6:41 pm
by TURBOMQ
How much roughy are the roh's?
thanks