Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.2TDi turbo upgrades. Comp Spec Help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 26
Joined: Thu Sep 20, 2007 8:59 pm
Location: Running from the BBDA

4.2TDi turbo upgrades. Comp Spec Help

Post by Farva »

gday fellas

well im startin to seriously think about doing the ute up for OBC and other similar events. in regards to engine upgrades etc what is the main go? i figure bigger turbo would be the main one but what to get is another thing. had a look on garrett website and theres about a million different models. is there a specific type i should be aiming for? how much am i looking at for just the turbo itself? the utes 04 model should i look at pissing off some of the electonic shit for the fuel pump ect and run mech one. what sort of injectors should i upgrade to. all help would be appreciated hoping to get out on the scene by 2010. makes it a bit hard being in WA with such a small comp scene.

had a bit of a seach on the bible but couldnt find anything specific to what i want.

cheers
adam
Posts: 50
Joined: Fri Jan 13, 2006 8:05 pm
Location: vic

Post by big scotty »

give joel a call at pgs 4wd at mornington he will be able to help you out or even pm him im pretty sure he is under pgs 4wd on here
45's v 8 turbo the way to go
User avatar
sw1
Posts: 297
Joined: Mon Mar 15, 2004 10:06 am
Location: around the place

Re: 4.2TDi turbo upgrades. Comp Spec Help

Post by sw1 »

Farva wrote:should i look at pissing off some of the electonic shit for the fuel pump ect and run mech one
have you actually bothered to look at what it does & how it does it?

Farva wrote:what sort of injectors should i upgrade to
why do you think the ones that are fitted wont be up to the job after a burst pressure increase?
if you want 'better' injectors what other things will you be doing to take advantage of this?
Last edited by sw1 on Fri Jan 16, 2009 6:51 am, edited 1 time in total.
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

Get a petrol V8, engine weighs less, more power and less heat issues.
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Post by madrolla68 »

Plenty of things can be done,like upgrading to a different turbo that will spool earlier etc,the pump can be changed for an earlier type without the TCV but the engine light will be on all the time.

Are you upgarding the intercooler??.

We are currently trialling a pump and turbo setup on a comp truck with a 12mm head and rotor and a modified mitsubushi TD05 that should yield some good results and we are in WA.

Pm me for more details if you like.

MAtt
Posts: 175
Joined: Mon Apr 12, 2004 7:56 pm
Location: Norway

Re: 4.2TDi turbo upgrades. Comp Spec Help

Post by vn15 »

Farva wrote:gday fellas

well im startin to seriously think about doing the ute up for OBC and other similar events. in regards to engine upgrades etc what is the main go? i figure bigger turbo would be the main one but what to get is another thing. had a look on garrett website and theres about a million different models. is there a specific type i should be aiming for? how much am i looking at for just the turbo itself? the utes 04 model should i look at pissing off some of the electonic shit for the fuel pump ect and run mech one. what sort of injectors should i upgrade to. all help would be appreciated hoping to get out on the scene by 2010. makes it a bit hard being in WA with such a small comp scene.

had a bit of a seach on the bible but couldnt find anything specific to what i want.

cheers
adam
I have done heaps of mods to my GQ, wich is a 2.8TD by the way, and running bigger pump(12mm), a lot of custom stuff made, + gas injection, water/meth injection. The turbo used is a GT2871.86AR.

Am about to do much of the same mods to my LC80 4.2TD, and the turbo I have bought is a Garrett GT3071 with external wastegate. You need a big turbo in order to make power higher up in the rev range, being a roller turbo helps spooling. A smaller turbo is all about low down torque and nothing else, leading to high EGT also.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest