Going to remove my bodylift, so went to shed to find originals. As I only moved interstate 2 weeks ago, this was quite difficult.
In short, I finally found 10 bolts about 8 mm thick and 100mm long.
Are these it?
If not, can someone send me the factory bolt lengths so I can get some new ones.
Cheers
Daniel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Body bolts
Body bolts
92' Mav. seat covers, air freshner, floor mats, half eaten sandwich..........
http://www.outerlimits4x4.com/ftopic147700.php
http://www.outerlimits4x4.com/ftopic147700.php
Just did a lift on mine. Standard bolts that came out were 1/2" unf thread at 120mm long. This leaves about 10-20mm of exposed thread once tightened up.
Hint: Use new Ny-lock nuts rather than re-using the old ones.
Cheers
Dave
Hint: Use new Ny-lock nuts rather than re-using the old ones.
Cheers
Dave
1997 GQ 4.2 Diesel Wagon
Aftermarket turbo & intercooler, 3" Exhaust,
4" susp Lift, 3" body lift, 35" Muddies
Spotties that start bushfires at 100m
Pleasure in life : Towing Toyotas
Aftermarket turbo & intercooler, 3" Exhaust,
4" susp Lift, 3" body lift, 35" Muddies
Spotties that start bushfires at 100m
Pleasure in life : Towing Toyotas
Who is online
Users browsing this forum: No registered users and 1 guest