Page 1 of 1
hilux rear center flip
Posted: Tue Jan 27, 2009 9:45 am
by MUD80D
is there any way of flipping the rear center of a hilux for more drive shaft clearance will the axels still line up in the center just want to no if it can be done
Posted: Tue Jan 27, 2009 12:31 pm
by SIMMO84
nope
Posted: Tue Jan 27, 2009 12:56 pm
by Willy Hilux
Just put a high pinion centre out of a Bundera, 100 series, etc front diff. Don't know how strong it will be in the rear but I run one in the front of my comp truck. Broke 2 in one day with stricky tyres. Had no worries when I ran Simex's.
Posted: Wed Jan 28, 2009 8:42 pm
by dumbdunce
as willy says you can use a high pinion from a 80/105/bundera however it will be running backwards so if you have crawler gears or big tyres you will probably break it.
it only raises the tailshaft, it doesn't raise the lowest point which is the bump in the bottom of the axle housing, you can shave an inch or so off there if you're keen.