Page 1 of 1
how did you do it??
Posted: Mon Feb 02, 2009 8:07 pm
by michael a
ok guys its bullbar building time.
How has everone mounted off the front of the chassis?
some pics would be great.
Goin to build a external cage as well if you have any pics so that I can steal some ideas
cheers
Posted: Mon Feb 02, 2009 8:23 pm
by skez
use crush tubing in the 2 front chassis rails and bolt it up there and if its a wt just grind the side of the bolt a bit to fit it in
sorry dont have any better ones
Posted: Tue Feb 03, 2009 11:20 am
by michael a
How may bolts are you holding the bar on with?
Posted: Tue Feb 03, 2009 2:35 pm
by ofr57
standard = 4
if you want it stronger have a look though want33's build up thread on how he added reinforcement braces
Posted: Tue Feb 03, 2009 2:51 pm
by Turbo Tonka
or use 40x40 rhs inside the chassis rails,something nice and strong,not the best fit,but a couple of us have front bars/exos all off this and has worked fine.Pretty simple method just have to cut the rhs,notch it out to go around front cross member and drill four holes,4 bolts mount it but it depends on what your bar will be made of i guess as to whether rhs or flat will suit best