Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

harmonic balancer nut td 4.2

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

harmonic balancer nut td 4.2

Post by stormpatrol »

How hard is it to undo the harmonic balancer nut , got 1/2 drive gun and socket but i think its gunna be a bitch nissan td4.2 has any of the forum guys done this :?:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 159
Joined: Sun Mar 19, 2006 12:04 pm
Location: Kurrajong NSW

Post by rustys »

Mate put a breaker bar on it and rotate the engine until the bar is about 3''s of the chassis rail then crank the engine over with the key.
You will need 2 people to do this one to hold the socket on (using your FOOT NOT YOUR HAND) and one to turn the key.

Its a bit of an old trick but it works.

Garth
Top
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

X2
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

Post by stormpatrol »

rustys wrote:Mate put a breaker bar on it and rotate the engine until the bar is about 3''s of the chassis rail then crank the engine over with the key.
You will need 2 people to do this one to hold the socket on (using your FOOT NOT YOUR HAND) and one to turn the key.

Its a bit of an old trick but it works.

Garth
BIG OK WILL GIVE HIM AGO :D
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests