Outer Limits 4x4 Board

How hard is it to undo the harmonic balancer nut , got 1/2 drive gun and socket but i think its gunna be a bitch nissan td4.2 has any of the forum guys done this

Mate put a breaker bar on it and rotate the engine until the bar is about 3''s of the chassis rail then crank the engine over with the key.
You will need 2 people to do this one to hold the socket on (using your FOOT NOT YOUR HAND) and one to turn the key.

Its a bit of an old trick but it works.

Garth

X2

rustys wrote:Mate put a breaker bar on it and rotate the engine until the bar is about 3''s of the chassis rail then crank the engine over with the key.
You will need 2 people to do this one to hold the socket on (using your FOOT NOT YOUR HAND) and one to turn the key.

Its a bit of an old trick but it works.

Garth

BIG OK WILL GIVE HIM AGO