Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Custom pipe work

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Custom pipe work

Post by RN »

I removed my old style aluminum bar from the Mav because ......I wanted to. Looked dated.

I made my own front bar using the rear bar off a GQ. Mounted some fog lights in the place where the brake and indicators sat. I have some good spotties that I want to fit also.

Anyone know of firms around Frankston , Mornington, Dandenong that can do fabrication. Basically I need round pipe bent into a U shape with provision to mount the spotties. It will be bolted onto the existing bar.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

http://www.cheezyracing.com.au/

SIMPLE
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Prety sure YankeeDave (lurks more in the Jeep section nowadays) has a pipe bender and welder that could be put to use for you, and lives in the same area.


Nothing against Cheezy what so ever.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests