Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transmission stuff

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

transmission stuff

Post by bad_religion_au »

ok, so i tell my family not to drive the 1976 fj40 yet (it isn't finished) so they do.

The speedo stopped working, 10k's later, there is a grinding type noise coming from the gear box. aparently sounded like when a thrust (?) bearing is shot in an old FX holden. only makes the noise in 4th, and in 3rd when lifting off the throttle.

someone please tell me there is some good news

ohh yeah, stock 4 speed behind a 2f.
Spit my last breath
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Yeah the good news is you can make whatever family member it was driving it do all the dirty work .. :x
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

nah, this is the same family member that's only job in the head rebuild was to drain the oil and refill it, and forgot to put the plug back in.
Spit my last breath
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Bugger ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests