I've just had new suspension installed with a 50mm lift on my HJ61.
Axle to bump stop clearance in the front is approx 65mm. My expectation is that the lift should be additional to the stock height (45mm). So I'm expecting 95mm, am i wrong?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suspension lift expectations
Moderators: toaddog, TWISTY, V8Patrol, Moderators
yes, but depends on the weight of the vehicle too... if you're carrying a lot of stuff its gonna ride low... then theres the whole manufacturing process to take into account too.
The lift factor of off the shelf springs is only a guide, some get 3" from a 2" kit, some only get 1"... luck of the draw.
The lift factor of off the shelf springs is only a guide, some get 3" from a 2" kit, some only get 1"... luck of the draw.
The worst thing about censorship is ███████.
Who is online
Users browsing this forum: No registered users and 0 guests