Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Body mount bolt lenghts 60's
Moderators: toaddog, Elmo, DUDELUX
Body mount bolt lenghts 60's
Dose anyone have a list of the bolt lenghts of the body mounts on a 60 series? Im helping a mate do a 2" one to his truck and i not sure of the lenghts.
TEAM TONKA
SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
I bought a bodylift kit from Superior Engineering. A bit vague I know, but I'm sure there are two different length bolts. The existing long bolts can be used as your new short bolts (if that makes sense). Then you only need new long bolts - but I'm not sure of the size.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
I knew I had the measurements somewhere!
* Front = 100mm
* Footwell = 100mm
* Under front seats = 135mm
* Under rear seats = 150 mm
* Centre of the cargo area = 100mm
* Rear = 100mm
All bolts are 10mm.
I have instructions complete with photos if you want me to email them to you.
* Front = 100mm
* Footwell = 100mm
* Under front seats = 135mm
* Under rear seats = 150 mm
* Centre of the cargo area = 100mm
* Rear = 100mm
All bolts are 10mm.
I have instructions complete with photos if you want me to email them to you.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
I only need to get the bolts now and we can do it. i will add 50 mm to those lengths and order them.Who is online
Users browsing this forum: No registered users and 7 guests