Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mq/k twin case conversion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 404
Joined: Sun Jan 11, 2009 6:39 pm
Location: serpintine wa

mq/k twin case conversion

Post by hillbilliywheelchair »

Hi im looking for a diagram for a remote mq/k transfer so i can take out the gears for the front shaft
then i should be able to run duel transfers whitch gets around not being able to get transfer gears

thanks
thanks jono
Skip 1995 tdi disco the new tourer
Tin Worn the scat crawler with charade (fwd) motor and auto patroll transfer and locked yota diffs all for under $1000
Top
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

leave the front output in there,, still have to leave the idler gear in there to get Low. Or just remove the front drive flange, shaft, gear and bearing hub assembly and plate it off. It should all come apart without even pulling the top off the case,, From memory anyways
Top
Posts: 37
Joined: Sat Mar 22, 2008 8:38 pm
Location: Rockhampton

Post by g60ish »

have been thinkin a lot about this latley. on my truggy base i have a remote tcase. both out puts are on drivers side so in my thinking a nissan 720 case in front of the mq remote might be easier. 720 case has center out put making it easy to just chop or flip. good luck plese post more info as you work it out. thanks ray
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests