Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G/box / J-shaft Noise ?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

G/box / J-shaft Noise ?

Post by mrRocky »

I have an annoying noise coming from the rear of the g/box region.
I thought it was the rear g/box mount which was shagged but i replaced it and the baastard noise is still there.
Its only when i take my foot of the gas when the car is gear and rolling.
as soon as i accelerate of push the clutch in it goes away.
Sounds like something rubbing and squealing on the brakes, but its not coming from there and ive checked.
Im thinking its the uni on the jackshaft, or possibly a bearing in the g/box.
I have already replaced the oil in the g/box which i overfilled and it made no audible change in the noise. I have checked the uni and it seems fine.
??? Next step change the uni and change the oil in the transfer??
just looking for ideas guys, the car is a 96 1ltr maruti ute with a 4spd and 140,000 on the clock.

cheers
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Does the noise get louder or higher pitched consistantly when you go through the gears, or does it go dull then get louder/higher every time you change gear?
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

Post by brendan_h »

reduction gears? i know they do that. also maybe change your gearbox and tcase oil? might no have enough in there?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

have u tried dropping the transfer into N when coasting with the noise there?

i was going to say thrust bearing but never know.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

noise is only present when i have the car in gear and take my foot off the accelerator. If i put my foot on the clutch it dissapears, and if i pop it in neutral it goes away also. I just got 4 new unis' to put in tmoz so well see how we go, if it is the g/box its a good excuse for a 1.3 conversion.
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

extremely flogged out uni with about 2mm of metal holding it together and the shaft had bent awsome ! Got a 2nd hand shaft from wreckers $225 and fitted new uni's $39ea , I threw out my spare j-shaft 2months ago damn, and it would appear they use a shorter shaft than the 1.3 making them hard to come buy. Noise is fixed
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest