Page 1 of 1

another flares question

Posted: Wed Apr 01, 2009 8:42 pm
by cooter
im about to buy a set of flares but the problem is that my rear gaurds are already chopped to level with the iner guard an im thinking that i will have to modify my wheel arches to fit the flares

im lookin at the lra flares so if any body that has them fitted has a closeup photo of the amount of chop required that would be awesome

im still trying the search function but with no luck as yet
cheers allan

Posted: Thu Apr 02, 2009 9:24 am
by DL
Some info and photos here:

http://www.lrautomotive.com.au/index1.html

cheers, DL

d

Posted: Thu Apr 02, 2009 3:41 pm
by luv4bee'n
I drowned a phone that had about 20 shots of the guard chop job just yesterday. :bad-words:
I have the lra flares on my 97 disco.
They (LRA) have two types n will tell you the cheaper type won't clear 35's but they certainly do.
I'm not able to send you pix, but you can have a look at mine if you like.
I still have the rear quarter intact.

Posted: Thu Apr 02, 2009 8:42 pm
by cooter
i might try and pop down mid next week mate cheers

Posted: Wed Apr 22, 2009 2:34 pm
by Goldey
Is the offer of inspecting the LRA flares open to anybody :) ? I live in Newy and am considering a set of flares for my 4dr tdi Disco as well. I am lead to believe that the Paddock spares rubber ones from the UK are the ones to get, but they are a fair bit more exxy.

Could you shoot me a PM luv4been?

Sorry for interrupting your message Cooter :oops:

Cheers

Goldey