Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ U-Bolts

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2480
Joined: Tue Mar 09, 2004 6:42 pm
Location: NSW

MQ U-Bolts

Post by r0ck_m0nkey »

Just wondering how good the drivers side mounting of the axle to spring is with the way the U-Bolts are being different to the normal way it's done. As i am thinking of modifying it to have it the normal way using a front and rear U-Bolt.

Is it worth doing or just wasting my time? I will probably do it regardless as i don't like the look of it, just wanting opinions.
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

Bit of a waste of time, cause there are THREE diffrent sized u-bolts and if it was good enought for nissan to have all three its good enough for me, cause i'm sure thier designers would have thought the exact same thought your thinking now, but they have more reasons to consolidate $$$$....
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

leave it alone and don't pick at it. Mine never had a problem. It all depends what u bolts u use. i found the arb ones to be good as i never broke any of them, although a mate did in the earlier years say year ago. All the ARB ones i used up until sep last year never broke. the TJM ones were made out of case hardened cheese and broke plenty of them. of course i'm talking full travel on hard stuff with twin lockers though.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests