Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Large diameter wheel balance place - Sydney ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Large diameter wheel balance place - Sydney ?

Post by quick60 »

Anyone know where to get a good balance done on some heavy 35's in Sydney?
I just had a new set balanced again, taken off the balancer and put straight back on and got different weights by up to 140g. Spent nearly 3 hours there trying to work it out, balanced on cones and on fingers with the same results each time. He reckons the machine was calibrated only a month ago, was on the phone to them, all sorts, but still getting a different weight each time the wheel is put on the balancer.

So, anyone know where there is a good place to go ?
Damian.

should I swim it first ?
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

I used a truck mob out at Riverstone to do my 42" Unimog tyres, can't remember their name but they were on Riverstone Pde.
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

Tyrepower in Richmond balanced my 35" 'Pedes (same as in your avatar). Richmond is a hike from 'the shire' though...
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Gday Damian,

ACE tyres in smithfield are the go. They will also do internal patch weights. 96043777
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

Jax at St Marys sell internal balancers, Place a bag inside the tyre and away you go. These are the only things I have found that work on my 35"s as they self adjust for chunks of missing rubber or flat spots. Mind you it does take 5km or so to get them sorted when starting out of a morning
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 17 guests