Outer Limits 4x4 Board

hey guys anyone know of a cheep engineer in the newcastle area? roughly wat would i be lookin at to get my zuk engineered?$$$$

jimy4b wrote:hey guys anyone know of a cheep engineer in the newcastle area? roughly wat would i be lookin at to get my zuk engineered?$$$$

Athol at cardiff

???????;73124 wrote:They all beat me to it, use Athol it's worth the drive. He normally charges $350 for the first thing to be engineered (this can be a whole group, like everything combined to be a SAS) then $40 per each new item on the report after that.

QUOTE: from another board.

Athol is a good bloke, he charged me $200 for the first item then $50 for every thing after that... Do you want his details?

Josh

my old man used athol also,a few hour drive from tamworth but for $180 then $40 a item after that its well worth it.Seems like a good bloke to go through and alot cheaper then my report

hey thanks guys seems like athol is the go. can i get the details of his work shop please?
cheers
Andrew

jimy4b wrote:hey thanks guys seems like athol is the go. can i get the details of his work shop please?
cheers
Andrew

can some one pm me to with his details please

jimbo

Google told me this...

Athol Mullen
Mullen Automotive Engineering

24 Newcastle St CARDIFF NSW 2285
Ph/Fax (02) 4956 8030, Mob. 0414 685537

there is one in garden suburbs....all I,ll say is its nearly a year since he looked at my zuk and many many phone calls to him with "its being printed" to "Ive lost it" to "Its nearly ready" to "what car did you have agian" to "I,ll ring u back whats your number"
But spoke to Athol and he was very helpful even though the work was already done (original engineer let me down after aproving it) gave me a very reasonable quote and said upon siting if he was satisfied he would write the certificate on the spot.
Heard many good thing about him should of gone ther first lol
Nik