Where to get Rubber

Post by **bundytunna** » Fri Apr 16, 2004 12:11 am

where the bloody hell in melbourne can i get cheap rubber
i need some to fill the guards up but its big dollar shit
i need 5 meteres of rubber prolly 6-10mm thick
i was thinking conveyor belt rubber
but it was 120 a metre at pruple pig
i got quoted 130 bucks for 5 metres of 250x6mm rubber at clarkes rubber
where the hell do i get cheap rubber from???
any other ideas???

Post by **Bluey** » Fri Apr 16, 2004 12:25 am

is this to run inside guard, along chassis rail, or as flare.

if you want cheap flares then buy some garden edging, comes in rolls at hardwares in 25m?, 50m and 100m. different brands and diff widths. made my flares from this. cheaps as (and some would say looks it :lol:

)

Post by **srowlandson** » Fri Apr 16, 2004 1:35 pm

what about the stuff frm Revolution Racegear...

We use it for mudflaps... 4-5 mm thick, plastic, not rubber as such... TOUGH is an understatment....

1.5 metre x 30cm length $80

Awesome stuff...No cheap, but would last forever
Steve

Post by **bogged** » Fri Apr 16, 2004 1:40 pm

Purple Pig in Bayswater.. was cheap when I got some while back

Post by **bundytunna** » Fri Apr 16, 2004 6:11 pm

yeh its for a the gap between the guards and the chassis as a result of the body lift
that stuff from rev racegear sounds alright
yeh i went to purple pig and they didnt have a clue

Post by **r0ck_m0nkey** » Fri Apr 16, 2004 6:31 pm

If plastic would do the job. Here is a question to answer.

Do you get black wheelie bins down your way? :twisted:

Post by **zzzz** » Fri Apr 16, 2004 7:08 pm

Revolution is where to get what you want.
Firetruck has it on the rear flares on the jeep.
One sheet of it was $120 or something but did both wheel arches no problem.

cheers

z

Post by **bundytunna** » Fri Apr 16, 2004 7:47 pm

zzzz wrote:Revolution is where to get what you want.
Firetruck has it on the rear flares on the jeep.
One sheet of it was $120 or something but did both wheel arches no problem.

bugger me 120 bucks
is it just me or is rubber bloody expensive these days

Post by **Macca177** » Fri Apr 16, 2004 7:52 pm

theres a Clark rubbe store down the road from me.. they can make up woteve u need... its in syd but... is there a store your way ?
try them if thers a store!

Post by **bundytunna** » Fri Apr 16, 2004 7:55 pm

theres a store but its gunna work out to be 130 + bucks
bugger that

Post by **60serius** » Fri Apr 16, 2004 8:03 pm

Kitchen rd Dandenong, Complete shopfitters, They make and refit
checkouts for Coles and Bilo ect they usualy have some old belts
from the old ones, worth a try !!!

Post by **big red** » Sat Apr 17, 2004 9:29 am

does it have to be that thick?
some pallets have a dark gray plastic sheet on them...i use a bit for crawling under the truck.
its about 1 to 2 mm thick and got it from a liquor land store pallet stack.
use the plastic fixings like they use on interior trim.
get the fixings from supercheap.
been thinking of doing the same to mine to save the cleaning under the tray.

Post by **redzook** » Sat Apr 17, 2004 11:24 am

if only u lived closer i could get u some for nothin

i just done my flairs in conveyor belt

Post by **ORSM45** » Sat Apr 17, 2004 3:13 pm

go to bunnings there is stuff for $20/m my bro used and it was fine. about 3-4mm thick. you wont need 10mm rubber.

Post by **bundytunna** » Mon Apr 19, 2004 8:09 pm

cool
all sounds good
ill try the place in dandy first
i might be able to get some for free but itll be preety worn out tho
at 20 bucks a metre i need 5 m thats 100
still preety dear
thansk everyone

Outer Limits 4x4 Board

Where to get Rubber

Where to get Rubber

Re: Where to get Rubber

Who is online