Thought id post here so i ask those who acctually might be able to help.
My 91 Rover "REGGIE" was handed my way from Grimace a while ago (cheers purple one) and since i have been slowly piecing it back to gether On the cheap.
I am down to the last few bits i need and as it allways works out they are the hardest to obtain.
Ok Rear door trims with the window switch and the extention harness that goes inside the door.
I have seen these on ebay but the fella wont send them. Pick up only.
Complete set of the 3 piece door locks. I can get these new from MR or off Fleabay but like stated Its on the cheap and they work out at around 50/60 bucks per door for the 3 bits
Any one able to help then let me know. Cheers Nottie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
91 RRC Interior bits
Moderator: Micka
89/95 are the ones i am after
If the timber is in place that will be fine as the miss has set herself a task to sand all the timber bits back and re stain them.
They are the trim that has the square door button not the round plunger type.
Like these.http://cgi.ebay.com.au/Range-Rover-1989 ... 240%3A1318
Let me now how much you would like for them Hobie
If the timber is in place that will be fine as the miss has set herself a task to sand all the timber bits back and re stain them.
They are the trim that has the square door button not the round plunger type.
Like these.http://cgi.ebay.com.au/Range-Rover-1989 ... 240%3A1318
Let me now how much you would like for them Hobie
Who is online
Users browsing this forum: No registered users and 5 guests