Outer Limits 4x4 Board

Thought id post here so i ask those who acctually might be able to help.
My 91 Rover "REGGIE" was handed my way from Grimace a while ago (cheers purple one) and since i have been slowly piecing it back to gether On the cheap.
I am down to the last few bits i need and as it allways works out they are the hardest to obtain.
Ok Rear door trims with the window switch and the extention harness that goes inside the door.
I have seen these on ebay but the fella wont send them. Pick up only.
Complete set of the 3 piece door locks. I can get these new from MR or off Fleabay but like stated Its on the cheap and they work out at around 50/60 bucks per door for the 3 bits
Any one able to help then let me know. Cheers Nottie

think I have some rear door trims which came out of an 89 - from memory they are the wood grain ones and the wood isn't in good condition

89/95 are the ones i am after
If the timber is in place that will be fine as the miss has set herself a task to sand all the timber bits back and re stain them.
They are the trim that has the square door button not the round plunger type.
Like these.http://cgi.ebay.com.au/Range-Rover-1989 ... 240%3A1318


Let me now how much you would like for them Hobie