Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What size rims for 75 Series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

What size rims for 75 Series?

Post by BUNDERA »

What size rims come out standard on the 75 series Toyota?

I am pretty sure it is 16"....am i correct?

Is it possible to fit 15" rims by grinding off a bit of the caliper? Do you have to grind off much or is it pretty straight forward?

Thanks in advance,

Regards,
Nick
______________________
PRAISE THE LIFTED
Top
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Contact:
Contact MUSS

Post by MUSS »

go 16x8 with a half inch offset and run 315x75x16....equal to 35.5x11.2x16
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

Transport have approved me to run 10"s on road so I was either going to go 16x10 or 15x10 when I get it.

Is there much difference in the cost of wheels and tyres between 16's than 15's?

Cheers,

Nick
______________________
PRAISE THE LIFTED
Top
Posts: 26
Joined: Mon Sep 22, 2003 2:30 pm
Location: perth wa

Post by brad75 »

75 series come out with 750x16s standard.I run 15x8s without any mods to the calipers at all!
one sick 75
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

JAKE wrote:go 16x8 with a half inch offset and run 315x75x16....equal to 35.5x11.2x16


U sure???

http://www.4lo.com/calc/gearmetric.htm

This calculator entering the input runnin the 315/75/16 works out to be

34.6 and 12.4 wide :armsup: :armsup: :armsup: :finger: :finger:
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

U should be able to run 15's on 75 Series no troubles.
The caliper mod is only needed on the early 120 prados to fix 16" rims, and probably early 100 series cruisers. It only involved grinding away (delicately mind you) a bit of extra casting that has now been removed as it served no structural purpose to the caliper.

Borrow a mates and find out.. much easier.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

Thanks, exactly what I wanted to know.

Regards,
Nick
______________________
PRAISE THE LIFTED
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 41 guests