Page 1 of 1
Will 80s diff bits swap into a 100s rear housing??
Posted: Sat May 09, 2009 6:00 pm
by luxembuger
Hey all, I'm currently swapping a 100s diff into the rear of my lux. It'll be a piece of piss they said... yeah right! Couple of dramas, firstly the 100 has 5 stud wheels, secondly 15in rims don't fit over the 100s brakes. So because I have the 100 housing already i'm wondering if the 80 bits will fit the housing, such as the brake assy and axles etc. Any tips are appreciated!!
Cheers, Chris.
Posted: Sat May 09, 2009 9:40 pm
by crankycruiser
im pretty sure the brakes will fit (but obviously u will need the 80 hubs) but u cant fit 15" wheels on the rear of a post 93 80 anyways... ...
and because u have used the 80 hubs u would need to use 80 axels. (not sure if spline is the same) or put 10mm studs in the 80 hubs...
Posted: Sun May 10, 2009 12:03 am
by luxembuger
I see, thankyou very much CC and thanks also for answering the Q I forgot to include in my post about which model 80 15in rims would fit onto... Well looks like a few more bits n pieces to collect yet.
Cheers again CC.