Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 in 2 a 40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 9
Joined: Sat May 09, 2009 5:33 am
Location: darwin

80 in 2 a 40

Post by wheelin »

has any one ever put a turbo 1hz in to a soft top fj40?
how hard was it to do ?
is there room to put a 5 speed gear box and t case out of a 80?
if so did any cross member have to be moved and what about the tail shaft?
Top
Posts: 9
Joined: Sat May 09, 2009 5:33 am
Location: darwin

Post by wheelin »

bump
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Look up "Stoive" on this site. From memory he installed a 1HZ (don't know if it was turbo or not) into a BJ40. Funnily enough it is a soft top although I'm not entirely sure how much difference that makes to the conversion. :D
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

RAY185 wrote:Look up "Stoive" on this site. From memory he installed a 1HZ (don't know if it was turbo or not) into a BJ40. Funnily enough it is a soft top although I'm not entirely sure how much difference that makes to the conversion. :D
its all to do with weight distribution and aerodynamics. you wouldnt understand. :finger:
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

DIRTY ROCK STAR wrote:
its all to do with weight distribution and aerodynamics. you wouldnt understand. :finger:[/quote]

Clearly. :D
Top
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

stoives rig has the 1hz and 5speed box in it, he had to built engine mounts n gearbox x member, new front n rear shafts also i think. it hammers tho lol
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

if you wanted to you could run the box from a 75 series if you did not turbo it
they are very similar in size to the 4 speed and runs the spit case so you could use a trans brake
and would fitt easier than the masive h150
plus most h150 have full time
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests