recently lifted my rangie a bit more and as the maxidrives were put in by previous owner at stock height the vacuum actuator lines are now quite tight so i'm looking at lengthening the front and re-routing them along the front radius arms.
just wondering is this were most people run them, mine were out the side near the shock tower and straight down, this ment they had to stretch in length, least along the radius arms the will never have to alter in length.
also what would be the best way to create a strong waterproof join, as it would have to be under the car somewhere and i really dont want the engine sucking in water in a river/boghole etc. or getting caught and pulling the join apart!
looking at something more secure then a vacuum hose joiner!
Cheers,
Cal.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lengthening maxi lines
Moderator: Micka
lengthening maxi lines
'86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274
To join the vacuum tube, use the clickfit airline (or plumbing) connectors, and yes I ran mine down the firewall and forward along the inside of the radius arm (held in place by a couple of hose clamps), then across the back of the diff etc. I clad my tubes in that bendy electrical stuff used for wiring. 2 years and still no damage.
Michael T
Aussie '88 RR Tdi300 Auto
Aussie '88 RR Tdi300 Auto
Who is online
Users browsing this forum: No registered users and 0 guests