stud pattern?

[D3V1L]

hey guys wondering if anybody could tell me the stud pattern and offset of the wheels on my f50 scat?

i currently have 15" mags i want to swap for 16"s so i can put my 36" simex extreme trekker2's


or is there anywher ei can get a hub adaptor to go from the 5 stud to landcruiser 6 stud? as the tyres are currently on my 80 series but im going to a different tyre

cheers
dave

[Doc_Acos]

If it is like the Rocky, it is the same stud pattern as the Ford F150 which off memory is 5.25" pcd. If it is the same they are a common size so it can help on price. Just double check offsets.....

[D3V1L]

cool cheers for that ill look into that.. might try getting a rough measurement with verneas and seeing if i can match it to a more accurate pattern


dave

[steve_f20]

They are the same as the Rocky, also the same as Suzuki SJ/Samurai/Vitara etc and the Lada Niva. I did have a set of Suzuki Vitara Wideboy alloys to go on mine but I have had a change of plan and am going to put some toyota axles under it. There is a picture in this thread http://www.outerlimits4x4.com/ftopic135 ... highlight= but they are 15x10 rims so not really what you want. If they are the same as in the UK the Grand Vitara came with a 16 by I think 8 inch rim so might be a good starting point.

[D3V1L]

thanks for that guys

im gonna try get some adaptors made to go from the scat pattern to my 6 stud cruiser pattern, so i can put my offroad tyres on either car


dave

[Newtothefourbeworld]

on a similar note would these fit a feroza:

"Rims to suit Suzuki Jimny and Jeep CJ Wrangler"