Outer Limits 4x4 Board

hey guys wondering if anybody could tell me the stud pattern and offset of the wheels on my f50 scat?

i currently have 15" mags i want to swap for 16"s so i can put my 36" simex extreme trekker2's


or is there anywher ei can get a hub adaptor to go from the 5 stud to landcruiser 6 stud? as the tyres are currently on my 80 series but im going to a different tyre

cheers
dave

If it is like the Rocky, it is the same stud pattern as the Ford F150 which off memory is 5.25" pcd. If it is the same they are a common size so it can help on price. Just double check offsets.....

cool cheers for that ill look into that.. might try getting a rough measurement with verneas and seeing if i can match it to a more accurate pattern


dave

They are the same as the Rocky, also the same as Suzuki SJ/Samurai/Vitara etc and the Lada Niva. I did have a set of Suzuki Vitara Wideboy alloys to go on mine but I have had a change of plan and am going to put some toyota axles under it. There is a picture in this thread http://www.outerlimits4x4.com/ftopic135 ... highlight= but they are 15x10 rims so not really what you want. If they are the same as in the UK the Grand Vitara came with a 16 by I think 8 inch rim so might be a good starting point.

thanks for that guys

im gonna try get some adaptors made to go from the scat pattern to my 6 stud cruiser pattern, so i can put my offroad tyres on either car


dave

on a similar note would these fit a feroza:

"Rims to suit Suzuki Jimny and Jeep CJ Wrangler"