Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series parts compatibility.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 33
Joined: Tue Apr 14, 2009 10:15 pm
Location: ALBURY WODONGA

80 Series parts compatibility.

Post by mada1234 »

I have a '98 model poverty pack 80 series, with the double size front passenger seat..
I dont need an extra seat, and i could make good use of the extra space up front...
What im wondering is,,, would a single front seat and its mounts bolt into place of the double seat?
I think there was provisions for both in the 60 series, is the 80 the same?
Top
Posts: 549
Joined: Sat Feb 14, 2004 11:17 pm
Location: Vic

Post by The Fish »

Yes, GXL seats bolt into the original factory holes ;)
Top
Posts: 196
Joined: Mon Jul 30, 2007 9:51 pm
Location: Guildford

Post by Mid73 »

The runners are the width of the single seat, so will bolt strate in
80's on 33' km2 and bling wheels, 2" lift and a big wish list
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

I've done this before for a customer. Wanted 2 buckets and a centre console instead of the bucket and 3/4 bench. Seats bolt straight in. If you want the centre console, the front mount hole is already there but from memory you need the bracket for the rear mount and will need to drill and bolt/pk screw it to the floor in the appropriate spot.

BTW, you can leave the drivers seat as is, this bloke just wanted matching trim so bought both buckets for me to fit.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests