Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need a new motor

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

need a new motor

Post by matto »

hey guys a mate of mine has killed his 2.8 diesel and he requires a replacement does anyone know who sells them in the sydney/newcastle area. He told me it is a ln106 but i dont know if that is the motor or the vehicle model.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 166
Joined: Fri Sep 19, 2008 6:19 pm
Location: New Zealand

Post by xxxhilux »

a ln106 is the vehicle and the engine is a 3L but sorry dont know who sells them
http://www.outerlimits4x4.com/ftopic154894.php
Posts: 324
Joined: Thu Aug 09, 2007 11:18 am
Location: Sydney

Post by Evski »

Try East Coast 4x4 spares in Sydney. They sell reco motors which look the goods. Around the $3000 mark I think
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

cheers guys is 3k a fair price for the donk
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 324
Joined: Thu Aug 09, 2007 11:18 am
Location: Sydney

Post by Evski »

That is a fully re conditioned engine, bar the injection system. If my 3l blows up thats where I would go. You could get them cheaper but wont be rebuilt, just a second hand engne which could go bang in 100ks or 400 000ks. You could get your engine rebuilt which might be cheaper, diesels are expensive to repair either way.
Posts: 578
Joined: Sun Jun 17, 2007 6:44 pm
Location: melbourne

Post by Wambat »

3 gs for a rebuilt one dosent sound to bad to me, just be thankfull it isnt a 12ht, 3 grand just for the injector pump to be rebuilt, 4 - 6 grand for a second hand motor, i would hate to see what a reco one would be going for.
Go Hard Or GO Home
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

Wambat wrote:3 gs for a rebuilt one dosent sound to bad to me, just be thankfull it isnt a 12ht, 3 grand just for the injector pump to be rebuilt, 4 - 6 grand for a second hand motor, i would hate to see what a reco one would be going for.
I got quoted 3600 to rebuild mine, but thats walk in walk out (not injection system), so 3k sounds good, i assume thats exchange? is it removed and refitted? or do you just carry in an engine and carry out a better one.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 3
Joined: Tue Feb 17, 2009 3:02 pm
Location: Perth, Australia

Post by chrisw »

3K is pretty good for a reco. I assume that would be exchange as well. I've also been looking at getting a reco 3L and the best i've found is about 6k fitted, no injectors or injector pump. 12 month unlimited km warranty (injector pump service advised or warranty may be void).

You would also be able to drop a 5L in (3 liter L series engine, drop in replacement) with minimal effort.
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

Personally I would nit go the 5L route. Ive had one in a LN106 and dont think it is as good as the 3L. Dont know why should be that little bit better with 0.2L more displacement, just didnt feel as good as the old 2.8L.
I may have got a dud but another mate has a used 2.8 (ex mine vehicle) the got a 3.0L and also said the same thing.
Posts: 3
Joined: Tue Feb 17, 2009 3:02 pm
Location: Perth, Australia

Post by chrisw »

Fair nuff.
reconditioned 5Ls are more expensive too.
Post Reply

Who is online

Users browsing this forum: No registered users and 69 guests