Page 1 of 1
gq 4.2 diesel pump
Posted: Sat Jun 06, 2009 8:59 am
by money_killer
i have been searching for about 2 hrs now and had no luck.
need to turn down a pump that had a turbo on it gq and now the turbo is off so. need a diagram so know where this screw is u adjust.
thanks aaron
Posted: Sat Jun 06, 2009 9:00 am
by Mario
Posted: Sat Jun 06, 2009 9:32 am
by money_killer
thanks mate.
wat does rotative mean
Posted: Sun Jun 07, 2009 9:27 am
by JWB
money_killer wrote:
thanks mate.
wat does rotative mean
I presume Mario meant "Is it a rotory style" pump vs an
"inline style" pump. Although I'm not sure if any inline pumps were/are fitted to Australian released models.
cheers
Posted: Mon Jun 08, 2009 8:46 pm
by Ron Burgandy
Hey dude these GQ,s have a rotary pump and you really need to have a gauge to set them properly there are three nuts you need to loosen on the back of the timing cover that hold on the pump and then you twist the pump to adjust in relation to top dead centre
A dial indicator is needed with a long probe . this probe goes into the back of the pump in the centre ( A plug will have to be removed ) this will give you the position of the cam plate. the proper proceedure should be in the manual.
Hope it helps a little
Posted: Tue Jun 09, 2009 2:23 am
by Mario
JWB wrote:money_killer wrote:
thanks mate.
wat does rotative mean
I presume Mario meant "Is it a rotory style" pump vs an
"inline style" pump. Although I'm not sure if any inline pumps were/are fitted to Australian released models.
cheers
Yeah .... rotary !