Hey guys have a 82 MQ LWB Sd33. Just connected a original airconditioning compressor up ( Mine didnt originally come with one ) and am quite suprised at the air output.
I was expecting quite alot more!!! How do i gauge wether my compressor is putting out the right ammount of air OR are they better used with a air tank of some description?? Oh and i am running it at approx 2000rpm or so.
Please help!!, so confused.
MArc
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Aircompress/Output
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Shark wrote:Okay one of my friends has a small tank that will hold up to 1500psi, would something like that do the job or am i better doing what everyone else does and getting the truck tanks??
MArc
Old LPG cylinder perhaps?
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Okay but if i get a big enough tank is it possible to pump up all four tyres on the one tank of air. I want to be able to pump up my tyres as quick as. Although 8 minutes is pretty quick i want super fast tyre inflation. With the addition of a large resoviour will that help in cutting down the minutes?? Also i would like to be able to run air tools.
Marc
Marc
Shark wrote:Okay but if i get a big enough tank is it possible to pump up all four tyres on the one tank of air. I want to be able to pump up my tyres as quick as. Although 8 minutes is pretty quick i want super fast tyre inflation. With the addition of a large resoviour will that help in cutting down the minutes?? Also i would like to be able to run air tools.
Marc
Yep a big tank is good 9kg gas cylinder or so if you want to seat beads on tyres.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Shark wrote:Okay but if i get a big enough tank is it possible to pump up all four tyres on the one tank of air. I want to be able to pump up my tyres as quick as. Although 8 minutes is pretty quick i want super fast tyre inflation. With the addition of a large resoviour will that help in cutting down the minutes?? Also i would like to be able to run air tools.
Marc
if you want SUPER quick air up you need to get something like a carbon dioxide tank - the compressor/tank setup is slightly quicker than compressor alone but for airing up you need big volumes of air because you only get relatively low pressures from a compressor - at 110psi in the tank you'd need a 100 - 150 litre tank to air up 4 x 33x12.5" tyres from 15 to 35psi without the compressor running, and the air up time will be fast for the first tyre and slower as you get through the tyres. obviously faster if the compressor is running. a 9kg LPG cylinder is a good compromise size, it will make the air up a bit quicker as it will buffer between tyres, with the compressor running.
Free air locker to the first 20 callers!
saw a bloke on the discovery channel, going across antartica who put the tyre around the wheel, completly deflated, put lighter fluid inside the wheel and lit it, the tyre was inflated faster then you could say, holy fark!
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Well i took BOGGED's advice and went to a truck wreckers and picked up a nice sixed tank for $50. Decided that a small tank and an A/C comprssor is a shiteload better than what i have now!!! The little air tank is prolly around the same size as a 9kg gas bottle so should do nicely. Now all i have to do is work out exactly what i need to buy and where from.
Pressure relief vave??? Pressure switch?? Drain holes on the air tank???
All so confusing, gotta a feeling im gonna get ripped off by someone.
MArc
Pressure relief vave??? Pressure switch?? Drain holes on the air tank???
All so confusing, gotta a feeling im gonna get ripped off by someone.
MArc
Shark wrote:Got a price for a pressure relief valve from ARB today for $40. Does that price sound okay?? Sick of getting arse raped whnever i try and do things myself.
Marc
is that for a pressure relief or for a pressure switch? I don;t think ARB stocks a pressure relief, and $40 is about what they charge for their pressure switch.
Free air locker to the first 20 callers!
you need a pressure switch to turn the compressor on and off. the ARB one is good because it turns ON at about 85psi and off at about 115psi. the pressure relief valve is to protect the tank/fittings from over pressure in case the pressure switch fails with the compressor still running.
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 2 guests