Page 1 of 1
Gauges not working
Posted: Sun Apr 25, 2004 9:01 pm
by Shark
Was working on my car today installing a cb and wiring up the air con compressor and when i went for a drive my oil pressure/fuel and temp guage isnt working. EVERYTHING else is working in the car. Have checked fuses etc.
Anyone have an idea??
Marc
Posted: Sun Apr 25, 2004 9:14 pm
by Daisy
disconnect wiring to compressor and CB radio and resort to existing wiring to determine if that was the problem.
If so,, then you may have to run a new connection direct from the battery with a fuse to provide independant power for compressor and CB??
Just an idea
Posted: Sun Apr 25, 2004 10:56 pm
by voxson
Did you knock one of your printed circuit plugs outta the back of your dashboard...>?
Posted: Mon Apr 26, 2004 9:06 am
by Daisy
voxson wrote:Did you knock one of your printed circuit plugs outta the back of your dashboard...>?
How would he do that just wiring up the CB and the compressor???
Posted: Mon Apr 26, 2004 10:08 am
by Shark
Hmmm the compressor has all new wiring and the cb has power from the same wire that is running the stereo. Gonna have a good look today but really have no idea where to start.
Marc
Posted: Mon Apr 26, 2004 2:23 pm
by Shark
Had a really good look today and could not find the problem, so who would i take it to to fix, an auto elec???
Marc
Posted: Mon Apr 26, 2004 4:19 pm
by Daisy
Yer prolly an auto lekky would fix it without dramas.
Tom
Posted: Tue Apr 27, 2004 12:10 am
by Screwy
you will find it will be something simple and the auto elec will have it fixed up and sweet in 10 mins
Posted: Tue Apr 27, 2004 10:57 pm
by Woop
Where have you connected the wire to that youve got feeding your CB and compressor?
NickW
Posted: Tue Apr 27, 2004 11:39 pm
by Shark
All new connections were done properly, dont know where i could of stuffed up
Marc