Page 1 of 1

pitman arm

Posted: Sat Jun 13, 2009 1:52 pm
by 84hiluxrogers
hey guys can you tell me where i can get a pitman arm for a 84 hilux with a six inch lift kit because mine hits on the spring hanger
cheers

Posted: Sun Jun 14, 2009 4:45 pm
by Weiner
You mean drag link? Superior, Snake are the ones that come to mind.

Posted: Sun Jun 14, 2009 6:53 pm
by 84hiluxrogers
cheers mate i only just bought it and the bloke just told me wot he thought it was. what is the drag link. is that what u had to do on yours?

Posted: Sun Jun 14, 2009 7:58 pm
by Weiner
Hi mate, I don't run 6" of lift in mine, I have 3-4" and run 35"s with no rubbing.

If you want to get serious, look into getting a high steer setup.

Or just buy the dropped drag link.

http://www.superiorengineering.com.au/p ... ts_id=3693

Posted: Sun Jun 14, 2009 9:21 pm
by sloshy
I would go crossover with a lift that big. A drop drag link won't fix it.

Posted: Sun Jun 14, 2009 9:28 pm
by Weiner
sloshy wrote:I would go crossover with a lift that big. A drog drag link won't fix it.
I wouldn't run a lift that big in a hilux :D

Posted: Tue Jun 16, 2009 8:15 pm
by 84hiluxrogers
did you guys have to do any of this??

Posted: Tue Jun 16, 2009 8:30 pm
by hilux79
I ran one and bent it in 2 trips. It hit the U bolt. I only have about 3" in the front of mine so on a taller truck they may be better. My advice would be to get high steer or crossover and only spend your money once cause you will end up going that way if you want a flexy front end anyway.

Posted: Tue Jun 16, 2009 11:17 pm
by lokka
hilux79 wrote:I ran one and bent it in 2 trips. It hit the U bolt. I only have about 3" in the front of mine so on a taller truck they may be better. My advice would be to get high steer or crossover and only spend your money once cause you will end up going that way if you want a flexy front end anyway.
yep muchly aggreed spend your cash at superior u wont regret it :D :D