Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HELP!!!!!! How much does a disco's head cost?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 17
Joined: Sun Apr 12, 2009 2:28 pm
Location: Melton, Vic

HELP!!!!!! How much does a disco's head cost?

Post by Dklyne »

A friend of a friend have broken down in coonabarabran in their 95 model tdi disco 2.4? They towed caravan from camperdown and broke down their. Local mechanic said cracked head. $5k-$7k.

Is that right or are they getting ripped off?

RACV will bring them back to camperdown, so any help would be great. They can sort it out when they get back

Cheers Daniel
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

Tdi heads commonly crack, and replacement heads were about $3000-3500 (just for the part) last time I heard....
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 57
Joined: Thu Apr 27, 2006 7:56 pm
Location: Mackay, QLD

Post by C.A.Moseley »

I never knew they wanted that much for them! Go petrol. I recently got hold of a 3.9L complete for $500, gave it a rebuild $250, good as new, plus they make more noise!
'78 2 door Rangie, 3.9L , 2" body, 4" long travel, 35s, rear locker, disco auto, caged. GQ 4.2 18psi, 5" lift, ARB lockers, 33s,
Top
Posts: 17
Joined: Sun Apr 12, 2009 2:28 pm
Location: Melton, Vic

Post by Dklyne »

Thanks for the replies. Weren't sure if it was just small town taken advantage of tourist needen to get home or actual cost.

I will pass on the info.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Heads have come down in price a lot, can pick them up for less than $1500 and a guy on ebay sells them for $1300. If they are overheated severely they will crack.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

C.A.Moseley wrote:I never knew they wanted that much for them! Go petrol. I recently got hold of a 3.9L complete for $500, gave it a rebuild $250, good as new, plus they make more noise!
How do you rebuild a 3.9 for $250??
Or was that just new gaskets???
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

Loanrangie wrote:Heads have come down in price a lot, can pick them up for less than $1500 and a guy on ebay sells them for $1300. If they are overheated severely they will crack.
Heh... there you go... Rover parts prices are always moving dramatically. Td5 turbos used to be between 600-700 18 months ago, 3 months ago they're up around 1200. Go figure, and who knows where they're at now.
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 57
Joined: Thu Apr 27, 2006 7:56 pm
Location: Mackay, QLD

Post by C.A.Moseley »

nottie wrote:
C.A.Moseley wrote:I never knew they wanted that much for them! Go petrol. I recently got hold of a 3.9L complete for $500, gave it a rebuild $250, good as new, plus they make more noise!
How do you rebuild a 3.9 for $250??
Or was that just new gaskets???
Heads skimmed = $80
Stem seals = $20
Head Gaskets = $35
Rings = $40
Big ends = $35
Borrowed bore hone = priceless!
few extra gaskets, but that should keep it going for another few hundred thou. we can do cheap rebuild kits or do the work for you really cheap
'78 2 door Rangie, 3.9L , 2" body, 4" long travel, 35s, rear locker, disco auto, caged. GQ 4.2 18psi, 5" lift, ARB lockers, 33s,
Top
Posts: 369
Joined: Tue Sep 06, 2005 6:16 pm
Location: Melbourne

Post by RangingRover »

C.A.Moseley wrote: Rings = $40
Big ends = $35
Please explain??? Is that secondhand or something!
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

C.A.Moseley wrote:
nottie wrote:
C.A.Moseley wrote:I never knew they wanted that much for them! Go petrol. I recently got hold of a 3.9L complete for $500, gave it a rebuild $250, good as new, plus they make more noise!
How do you rebuild a 3.9 for $250??
Or was that just new gaskets???
Heads skimmed = $80
Stem seals = $20
Head Gaskets = $35
Rings = $40
Big ends = $35
Borrowed bore hone = priceless!
few extra gaskets, but that should keep it going for another few hundred thou. we can do cheap rebuild kits or do the work for you really cheap
Where do you stuff for those prices from?
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 5 guests