Mech has done a fair bit of work on the rear diff, replaced the pinion bearings spider gears and pretty much everything except the crown wheel and pinion. The whine is still there, so it looks like they have to be replaced. Any tips on where to get in around melb, or pick one up from the wreakers and swap bits around to match the new stuff?
Also what the standard ratio is, ie if I spot one for some reason at a good price swap over to 24 spline, ratio's the same?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear diff again
Moderator: Micka
Diffs are 3.54,
How many do you want. have a few spares at home.
If you can get a set of 24 splines and axles will be worth it just.
Michael.
How many do you want. have a few spares at home.
If you can get a set of 24 splines and axles will be worth it just.
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Who is online
Users browsing this forum: No registered users and 3 guests