Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

whos the cheapest

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

whos the cheapest

Post by matthewK »

whos the cheapest for

brake peddle and clutch peddle rubber covers
engine mount
lower control arm bush<where it bolt to the rear axle>

for my 1995 disco

cheers matt
1995 land rover disco on 265 muddies
Posts: 362
Joined: Sun Jun 15, 2003 9:50 am
Location: Melbourne

Post by amtravic1 »

Cant help with my supplier as I have a mate that works at a Rover parts supplier and I probably get a better deal than most.
You could try the Rover parts supplier in MIddleborough Road Blackburn just north of the address I gave you for the RWC. I believe they may be as cheap as any however I have heard some of the parts they supply may not be as good a quality as others. I think the business name is "FourWheel Drives" or similar.
www.amtra.com.au
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

that place is four wheel drives the address is 304 middleborough road blackburn south phone number (03)98900500.
these prices are little old but good for an idea.
pedal rubbers $22 each
engine mounts $16.50 each
if the ones i think bushes around $30

I have one of their older catalogues very handy.

Cheers Damo
have grinder will fit
www.4Bfabrications.com.au
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

cheers guy i will look into them

how far before or after is he from rob??
1995 land rover disco on 265 muddies
Posts: 362
Joined: Sun Jun 15, 2003 9:50 am
Location: Melbourne

Post by amtravic1 »

If you head North, they are on the RHS just over Canterbury Road. Perhaps a k or 2

Ian
www.amtra.com.au
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

stupid question how do u get the 3 point plange off the diff ???? to get the retaining nut off so i can change the oil seal?
1995 land rover disco on 265 muddies
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest