Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
End less air to SD33
End less air to SD33
Has any one managed to fit a York syle a/c pump to and SD for air??? Was it a battle fitting this type of pump?
I'm trying to do this at the moment too!
So far the only place I think will be suable is where the Power steering pump is mounted, move the pump down then mount the York there.
Mine has factory A/C (not that it works atm
) So I think I'll use the same belt but I want to see some pics of the P/S pump mounted lower down to work out if I can do it!
Cheers!
So far the only place I think will be suable is where the Power steering pump is mounted, move the pump down then mount the York there.
Mine has factory A/C (not that it works atm
) So I think I'll use the same belt but I want to see some pics of the P/S pump mounted lower down to work out if I can do it!Cheers!
Who is online
Users browsing this forum: No registered users and 2 guests