Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

putting magna engine into pajero a couple of quick qs

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 137
Joined: Sun Nov 02, 2008 8:07 pm
Location: SYDNEY

putting magna engine into pajero a couple of quick qs

Post by jonnyjtop »

hey guys i bought a magna 6g72 sohc 12v engine (actually iv got the complete magna) to put into my pajero 1992 nh jtop iv stripped the pajero motor and now just stripping the magna motor my questions are...

do you have to run the pajero oil pump housing??

do you run the pajero dizzy? or is the magna one ok to keep running

do you run the pajero water pump also...

why do you have to change the sump??the magna one looks very simmilar

as i said iv only just started stripping the magna engine and i dont wanna get any snags also going to get new gaskets and a new oil and water pump while its out just wanna get it done right the first time!!anything else i should watch out for would be appreciated! thanks guys/girls
j-top 3l v6 2+2 33s rear locker 4.9s thats it
Posts: 75
Joined: Fri Mar 20, 2009 3:11 pm
Location: Adelaide

Post by steverisingsun »

The pajero sump pick up is right at the back so you still get oil on a steep up hill climb. If you use the Magna oil pump it still clears the front diff. Distributors match.
Posts: 137
Joined: Sun Nov 02, 2008 8:07 pm
Location: SYDNEY

Post by jonnyjtop »

in regards to the oil pump iv noticed that the magna one has the oil pressure switch on the oppisite side where the air conditioner motor goes does this fowl on anthing or cause any problems do i also need to change the oil filter and bracet or can i also leave the magna one and run the oil pressure switch where it is??
j-top 3l v6 2+2 33s rear locker 4.9s thats it
Posts: 137
Joined: Sun Nov 02, 2008 8:07 pm
Location: SYDNEY

Post by jonnyjtop »

its ok guys got it all sorted out i forgot another member sent me a full rundown on what to do and it included the oil pump qs and everything thx
j-top 3l v6 2+2 33s rear locker 4.9s thats it
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest