Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

'86' hilux gearbox problems...need help

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

'86' hilux gearbox problems...need help

Post by collins110 »

my 86 hilux yesterday just decided it didn't want to go into gear. coming up to a set of lights i can manage to get it into first if i pick the correct time. to reverse i have to turn the car off put it in gear and turn it back on with the clutch in.

whats wrong? something serious? or just a quick adjust or fix?
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
User avatar
tez
Posts: 117
Joined: Wed Aug 01, 2007 7:03 pm
Location: Sydney

Post by tez »

Check the fluid in the clutch master cylinder.

Was it slipping before? IS the master and slave cylinder leaking?
Top
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Post by collins110 »

tez wrote:Check the fluid in the clutch master cylinder.

Was it slipping before? IS the master and slave cylinder leaking?
the clutch is picking up with no problems and nothing is leaking what so ever. just has the problem going down gears
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Post by collins110 »

i just checked everything...all fluids are correct no leaks...and it is not going into gear, clutch feels soft...does this mean it just needs adjusting?
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Will be the master clyinder. Mine did the same thing, theres a valve inside that is supposed to be a one way valve but when it gets old it lets fluid both ways. Hope that helps.
Top
Posts: 235
Joined: Sat Apr 11, 2009 4:12 pm
Location: Heidelberg, Victoria

Contact:
Contact collins110

Post by collins110 »

SIMMO84 wrote:Will be the master clyinder. Mine did the same thing, theres a valve inside that is supposed to be a one way valve but when it gets old it lets fluid both ways. Hope that helps.
if you are right, its a bummer i was hoping it was something quick to fix...any ideas on how much a newy would cost?
Northside Fleet Services PTY. LTD.
243 Dundas Street Preston, Victora
(03)94840432
(For all your Gas and Mechanical needs)
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

mine was about $20 -$30 cgeap as chips and takes about 20 mins to replace.
Top
User avatar
tez
Posts: 117
Joined: Wed Aug 01, 2007 7:03 pm
Location: Sydney

Post by tez »

See if its leaking on the inside of the cabs as well.
Top
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

If replacing the master replace the slave aswell. This is stop prevent a failure ao the slave if there is any debris in the lines from the old master
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests