Hey all,
I'm having problems with my rear diff. It makes a clunking noise when I
take off, as well when I'm going about 50 or 60 and i just let my foot of
the accelerator it clunks to. i got under and turned the rear tail shaft and
it has way to much back lash in the diff, what could this be and how hard
is to fix. i did get told by a mechanic it could be something to do with
the LSD buthe was unsure without having it pulled apart. The diff is also
only 1 year old i brought it reconditioned but they wont give me warranty on it.
Thanks Wade
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 Series Diff problems
Moderators: toaddog, Elmo, DUDELUX
80 Series Diff problems
80 Series Land Cruiser...... 4.2L diesel :)
Sounds like the collapsable spacer between the pinion bearings has lost tension and created play between the pinion bearings. Not a huge job to repair and if the bearings are ok it can be done without removing the centre. If you are mechanical minded though I would remove the centre and check the condition of all parts and rebuild on a bench prior to re-fitting it.
Who is online
Users browsing this forum: No registered users and 0 guests