Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 Series baby harness

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 21
Joined: Mon Mar 09, 2009 10:02 pm
Location: Brisvegas

60 Series baby harness

Post by sic60driva »

Just wondering if any of you 60 series owners out there know where to bolt down a baby seat< the missus has about 4 weeks left so its in need. cheers
Top
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

drill a hole put a plate
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Top
Posts: 1
Joined: Mon Jul 06, 2009 3:02 pm
Location: Albury,nsw

Post by Goose5 »

if it doesnt already hav proper anchor points you will need to put a crab bar in. it is a bar which mounts either side and has to be 150mm back from the seat and 100mm down and must be fitted by a licensed child restraint fitter.
Cheers Goose
Top
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

Yep crab bar is the way to go for safety and insurance sake go see a licenced installer and get the right info dont just drill a hole in the floor and mount a plate under it even tho it will most likely be enough ...
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

60 series anchor points are in the back of the seat, I know this does not meet the current standard, but thats where they are.
Supported By
Milanco
Phones N Alarms
Buds Customs
Top
Posts: 1
Joined: Wed Jan 28, 2009 6:04 pm
Location: Australia

Post by dousty »

I had a look under the carpet on the back of my 85 G model rear seat and there are no holes. Have a baby on the way as well but I have 3 months to get something done :)
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

http://www.outerlimits4x4.com/ftopic146 ... light=crab
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 10 guests