60 Series baby harness
Posted: Sat Jul 11, 2009 1:22 pm
Just wondering if any of you 60 series owners out there know where to bolt down a baby seat< the missus has about 4 weeks left so its in need. cheers
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
60 Series baby harness
Page 1 of 1
Posted: Sat Jul 11, 2009 4:51 pm
drill a hole put a plate
Posted: Sat Jul 11, 2009 8:58 pm
if it doesnt already hav proper anchor points you will need to put a crab bar in. it is a bar which mounts either side and has to be 150mm back from the seat and 100mm down and must be fitted by a licensed child restraint fitter.
Cheers Goose
Cheers Goose
Posted: Sun Jul 12, 2009 12:28 am
Yep crab bar is the way to go for safety and insurance sake go see a licenced installer and get the right info dont just drill a hole in the floor and mount a plate under it even tho it will most likely be enough ...
Posted: Sun Jul 12, 2009 9:20 am
60 series anchor points are in the back of the seat, I know this does not meet the current standard, but thats where they are.
Posted: Sat Aug 22, 2009 1:15 pm
I had a look under the carpet on the back of my 85 G model rear seat and there are no holes. Have a baby on the way as well but I have 3 months to get something done 
Posted: Sun Aug 23, 2009 9:22 am